コンテンツへスキップ
Starfront ObservatoriesStarfront Observatories
カート 0
現在、カートに商品は入っていません。

まだ何もありません。機材用の桟橋スペースを予約するか、Seestarをレンタルして撮影を始めましょう!

How to Ship Your Telescope to a Remote Observatory: Prep, Packing and Shipping Checklist

Shipping your telescope to a remote observatory can feel a bit like launching a space mission. Once the boxes leave your house, you can't walk outside and fix a loose cable. The good news is that almost every installation problem can be caught at home, before anything gets taped shut. This guide walks through how to prep, pack and ship a rig to Starfront in Rockwood, Texas, so it gets on the pier and imaging as quickly as possible.

Step 1: Make sure your rig is ready to run remotely

A remote telescope is a fully automated system. At a basic level that means a computerized mount, an autofocuser, and most likely an autoguider and an electronic filter wheel. A simple test: if your telescope can finish an imaging run on its own while you're asleep, it's ready to go remote. Our Remote Imaging 101 guide covers this in more detail, including PC and ASIAIR control options.

Beyond that, a remote setup needs two extra things:

  • A control computer you can reach from anywhere. We strongly recommend installing Chrome Remote Desktop before you ship. If it isn't installed ahead of time, setup can be delayed significantly.
  • A way to cycle power remotely, such as a Wi-Fi Kasa smart plug or a Digital Loggers power switch. This lets you restart your PC, camera or other gear without anyone touching it.

One setting people often miss: your PC should turn itself back on when power is restored. Look for "Restore on AC Power Loss" or "Auto Power On" in your computer's BIOS and switch it on. Without it, a remote power cycle turns your PC off and leaves it off.

Step 2: Do a full dress rehearsal at home

The fastest way to confirm everything works is to assemble your telescope at home exactly as you plan to run it remotely, then image a full night with it. Check that:

  • Your mount tracks reliably
  • Autofocus works
  • Your imaging workflow runs from start to finish
  • You can connect to the system remotely

Problems are almost always easier and cheaper to fix in your backyard than after deployment. While the rig is set up, measure your swing diameter carefully, since that decides which pier tier your system fits. The pier size guide on our blog and the Pier Size Guide page explain how tiers work. If your gear isn't tested, that's okay too. Our on-site technicians regularly set up brand-new systems, and advanced tech support is available at $50/hour for tricky issues.

When your test night goes well, pack everything you used. The full list of questions to answer is on our Pre-Shipping Checklist.

Step 3: Know what to send (and what to leave home)

Starfront provides the pier, the pier adapter, an ethernet connection and an AC power outlet. You send the rest:

  • Imaging essentials: telescope, imaging camera, mount, guide scope or off-axis guider, guide camera, and computer
  • Peripherals: USB cables for every device, power supplies (or a power box such as Pegasus or Wanderer), a web power strip, an ethernet switch if you have several network devices, and ethernet cables. We ask for a 30 ft ethernet cable in your shipment, though we also keep some in stock to purchase.
  • Mounting hardware: polar alignment pins and the screws that bolt your mount to our custom-machined plate (often 3x M6 bolts on AM3/AM5 mounts)

Leave tripods, tripod adapter flanges and pier extensions at home. The one exception is the mount screws. On an AM5, for example, the bottom bolt screws are part of the adapter flange, so take them off and send them. Forgotten mount screws are one of the most common reasons installs get delayed.

If you're shipping from outside the US, make sure your power supplies have US-compatible plugs. There's no need to send zip ties, because our team handles cable management during installation. A few mounts have special rules too. EQ6R, EQ5 and Sirius mounts need a custom two-tier plate, and Starfront doesn't accept Celestron CGX or AVX mounts. Check the FAQ before you ship one of those.

Step 4: Pack it like it's going to get bumped

Whatever sticks out from your telescope is the most likely thing to get damaged. Before you pack:

  • Remove the camera, the autofocuser (such as a ZWO EAF), filter wheels, flat panels and any 3D-printed parts from the tube, and pack them separately
  • Unplug every USB cable from its port
  • Pack counterweights and other heavy items in their own box, away from everything else
  • On a German equatorial mount, leave the gears or clutches disengaged so loads don't press on the gear teeth
  • On an SCT, lock the primary mirror and make sure the secondary mirror screws are tight (collimation can happen later)
  • Put on lens caps and covers, and use painter's tape if you need to tape any surfaces

Wrap each item in a good layer of bubble wrap, then surround it with padding like peanuts, paper or air bags. Original boxes and cases work well, but Starfront doesn't store them, so if you want a hard case back you'll need to include a return label. If you'd rather not pack it yourself, you can have UPS pack it for you, which shifts responsibility for packing damage on insured gear to UPS.

Step 5: Label, document and insure

Label everything with your name. You can't overdo it. Your name (the same name as on your reservation deposit) must be visible on the outside of every box, because customer boxes aren't opened until it's that customer's turn to be installed. The current shipping address is listed in the shipping section of our FAQ.

Also include:

  • An itemized list of the gear in your shipment
  • A photo of your assembled setup and notes on anything unusual, printed in the box or sent digitally

Take a few photos of your packages before they leave. Starfront photographs packages on arrival too, so there's a record of their condition at both ends. UPS and FedEx have been the most reliable carriers to our remote location, and both offer shipping insurance. Get it. Damage in transit is rare but it happens, and Starfront isn't liable for shipping damage, though the team will help document anything you need for a claim. It's also a good idea to insure the equipment itself while it's on the pier. Many customers add a rider to their homeowner's or renter's policy.

What happens after it arrives

Once your boxes arrive, our technicians install the rig on your pier, handle the cabling and get it online. Because the reservation deposit also covers installation for a single telescope, there's no separate install fee. After that, when skies are clear, the roof rolls off and you image from home. If you don't have a rig to ship, a Seestar rental lets you skip shipping entirely.

Get clear skies in your inbox. Sign up for Starfront's newsletter for new guides, seasonal target lists and observatory news.

FAQ

Do I have to test my gear before shipping?

It's strongly recommended, because a tested system gets imaging fastest. Untested systems can still be installed, and advanced support is available at $50/hour if something needs troubleshooting.

Should I send my tripod?

No. Leave tripods, tripod flanges and pier extensions at home, but do send the screws that bolt your mount to the plate.

Which carrier should I use?

UPS or FedEx. They've been the most reliable to Rockwood, and both offer shipping insurance, which we always recommend.

Is my equipment safe once it's there?

The site is fully gated, covered by video surveillance and staffed 24/7. See the FAQ for weather protection and insurance details, or contact us with questions before you ship.

オプションを選択してください